Product Overview
Osram Dulux L 18W Lumilux Interna Compact Fluorescent 4-Pin T5 Twin Tube Lamp |
Product Details
- Average Rated Life 20,000hrs
- Base 2G11 (4-Pin)
- Made In Italy
- Long Twin Tube Bulb (T5)
- Color Rendering Index (CRI)80
- Color Temperature/CCT 2700K Lumilux Interna
- Rated lamp efficacy 67 lm/W
- Industry Standards ANSI C78.901 - 2001
- Initial Lumens 1200
- EAN Code #4050300010748
- Rated lamp mercury content 2.6 mg
- Maximum Overall Length - MOL 217mm
- Diameter 0.630in
- Diameter 17.5mm
- Nominal Wattage (W)18
- Could Be Used With Magnetic, Electronic, Or Dimming Ballast.
- Packaging Info. OSRAM DULUX L LUMILUX 18 W/827 2G11 10/CS
- Spec Sheet
Cross Reference
- Philips Master PL-L 18w 2700K
- Value Brand PLL 18W Warm White 2G11
Replacement 18W 2G11 Ballast
- Sylvania QTP1/2x18CF/UNVDM
- Universal Triad CT218UNVME
| Approximate initial lumens after 100 hours operation. Minimum starting temperature is a function of the ballast; consult the ballast manufacturer. There is a NEMA supported, industry issue where T2, T4, and T5 fluorescent and compact fluorescent lamps operated on high frequency ballasts may experience an abnormal end-of-life phenomenon. This end-of-life phenomenon can resultin one or both of the following: 1. Bulb wall cracking near the lamp base. 2. The lamp can overheat in the base area and possibly melt the base and socket. NEMA recommends that high frequency compact fluorescent ballasts have an end-of-life shutdown circuit which will safely and reliably shut down the system in the rare event of an abnormal end-of-life failure mode described above. The final requirements of this system are yet to be defined by ANSI. For additional information refer to NEMA papers on their WEBSITE at www.NEMA.org. The life ratings of fluorescent lamps are based on 3 hr. burning cycles under specified conditions and with ballast meeting ANSI specifications. If burning cycle is increased, there will be a corresponding increase in the average hours life. Rule of Thumb for Compact Fluorescent Lamps: Divide wattage of incandescent lamp by 4 to determine approximate wattage of compact fluorescent lamp that will provide similar light output. |
